Loading
Stenter Finishing
No. 05 — Emerald
AL KHAIR provides controlled drying, width setting and heat setting on its BRÜCKNER stenter for approved polyester, synthetic, blended and relevant cotton programs.
01
The process
Controlled drying, heat setting and finishing on AL-KHAIR DYEING’s five-chamber gas-heated BRÜCKNER stenter.
01
Set to specificationTemperature, finished width and machine overfeed are set according to the fabric construction and approved specification.
Set to specificationTemperature, finished width and machine overfeed are set according to the fabric construction and approved specification.02
Through the stenterFabric is dried, heat set and finished on the existing BRÜCKNER five-chamber stenter.
Through the stenterFabric is dried, heat set and finished on the existing BRÜCKNER five-chamber stenter.Approved before the bulk lot runs
Nothing leaves this process on an assumption. The shade is matched, written down and signed off, and only then does the lot go on.
03
Checked before dispatchFinished fabric is checked against the approved reference and agreed program requirements.
Checked before dispatchFinished fabric is checked against the approved reference and agreed program requirements.
Image slot reserved for confirmed AL-KHAIR stenter photography.- Installed stenter
- BRÜCKNER, five chambers, gas heated
- Working width
- 102 inches / approximately 2,591 mm
- Expansion in progress
- Additional eight-chamber, 126-inch stenter planned
02
What is included
Everything below is part of the price, not an extra. Anything that is not on this list, we will tell you about before the lot runs.
- 01
- Drying, heat setting and width setting
- 02
- Softener, silicone, anti-static and water-repellent finishing
- 03
- Resin finishing and optical brightening / optical-white finishing
- 04
- GSM, shrinkage and overfeed control
- 05
- Machine settings adjusted to the fabric construction and approved specification
Send your fabric for development
Share the composition, construction, GSM, quantity and required shade. Our team will review the program before bulk production.
- Call +92 300 1206985Discuss your program
- Send development detailsWhatsApp